Harley Davidson Exhaust Gasket Replacement

Gaskets and clamps can both get reused.

Harley davidson exhaust gasket replacement. Dennis Kirk has been the leader in the powersports industry. This how to install exhaust gasket video was shot in part to help REDUCE it may not totally go away popping on deceleration first make sure that you do not have any intake or exhaust leaksWhen installing exhaust gaskets you want to make sure they do not bunch up. One is a steel mesh type and the other is a tapered asbestos fiber looking.

The crush gasket is made to mold to the surface of the exhaust pipe and cylinder headThe gasket is deformed as it is squeezed between the pipe and engine port. The gasket should also be inspected due to exhaust gasses leaking there now however theyre likely to just slap a new nut on and be done with it. Harley Davidson Forums.

Just tighten each side and the rest of the exh. Twin Power Extreme Performance Exhaust Gaskets TP9540-2 0. Also check condition of retaining ring.

Lightly lube the new gaskets with dish soap or light oil such as 3-in-1 oil Figure 2. The gaskets are inexpensive and easy to replace when the exhaust is off. The highest quality kits include AFM and MLS style gaskets Made in USA.

There are at least two types of exhaust gaskets. Dont overtorque the bolts the last thing you. The correct VRSC exhaust gaskets as mentioned above are PN 65109-01 used from 2002 through 2008 or 64971-09 for the 2009 and newer VRSC exhaust.

Clamps are reusable too. Start the vehicle and check the flange connection for leaks. Some front pipe gaskets are called donut gaskets and fit into a ball-flared exhaust pipe.